Stairlifts are a great way to help with mobility for senior people who find it difficult in their day-to-day lives. However, when it comes to the installation part, the room area is an essential factor to consider. It is because the same will decide how much free space you will have after the stairlift is installed.
In this guide, we will talk about some essential points to consider for the ideal room area you would need for the stairlifts.
And so, here are the three leading suggestions you may find useful for this case –
Size of the floor area
Another significant factor you need to consider for a better estimation is to measure the size of the floor area. Whenever it comes to estimating the area you would need for the stairlift, the first major requirement is to know how long the staircase would be. However, it is important to take the measurement from the top and then proceed toward the bottom of the staircase.
Further, you must also make sure to take the measurement slightly towards each of either stair treads to get a more precise result. One of the best ways to get this is to extend the tip of the tape to the bottom of the floor area and then take it towards the first stair tread where you would like to set up the rail for the stairlifts.
Alternatively, you can also prefer to stretch the length depending on the stairlift design to make access to the staircase easy if the stairlift does not have frequent use. In this way, you will be able to have a proper estimation of the size of the floor area and understand the requirement of the room area you would need to adjust accordingly.
Measurement of the staircase width
Apart from considering the floor area, it is also essential to consider and measure the staircase width. The main reason why it is important is that having an idea of the staircase width will help you to adjust the room area accordingly. It is also because staircases come in different varieties depending on the use and types of staircase. And so, width becomes essential to be considered while designing the stairlifts, which is why it must be measured with utmost precision.
After all, anyone would hardly appreciate having a scared left that covers the whole width of the stairway, leaving the remaining area unusable. That’s why they would always recommend you measure and considered the width of staircases from one to the other if you want to have an estimate of the room area you would need for the same.
Clearing distance toward the bottom
When planning to install a staircase in your house, you would also need to know how far a possible obstacle would be so that you can also consider it. It is usually required when the stairlift is installed near a room door.
When such a situation occurs, you must measure the clearing distance to have a clear idea of the remaining space you will have at the bottom area. Usually, 18″-22″ are ideal measurements, but you must also check for the measurements before going for the final installation. It will also leave enough space for the stairlifts to stay installed safely with enough room for you to get off the seat easily.
However, if you still feel like there is not enough space available, this does not mean that you cannot get the installation done. You can consider getting additional assistance from a hinge track system to figure out the solutions for limited space. It would help you decide how to carry out the operations in the remaining area safely.
Having an accurate idea of these measurements is essential not just to determine the amount of space for the stairlift. It will also help you understand the type and design that will be perfect depending on the settings of your room. Therefore, it is necessary to consider these points and take the measurements accordingly.
We hope you will find this guide helpful in getting an idea of the room area you would need to install the stairlifts conveniently. To make the most out of these suggestions, we would recommend you take precautionary measures to get the most precise results.